“© ResMed 2012 Used with Permission”
ResMed S9 Elite CPAP w/Humidifier and ClimateLine Tube #36023The
ResMed S9 series offers an intuitive, colorful, and stylish look. With
four clearly marked buttons and a large color display, adjusting
settings has never been easier. A large push dial allows you to scroll
through screens and make changes easily. The large color screen allows
you know where you are scrolling and what setting you are adjusting by
changing colors. The info button allows you to view compliance data and
reports with a single push, and the large start button offers an easy
one touch start. The sleek low profile design makes your CPAP look less
like a sterile medical device and more like a standard bedside clock
radio, further encouraging you to be consistent in using your therapy.
A new feature for the S9 series machines is the H5i humidifier. This
humidifier adapts to the specific environment of your bedroom and
adjusts the heat and humidification, so you receive the exact heat and
humidification that you select on your machine.
ResMed introduces its new SlimLine Tubing with the S9 series machines.
Exclusive to ResMed the SlimLine Tubing is 40% lighter, 20% thinner, and
takes up 35% less space. Providing more flexibility and less drag with
lightweight materials, the SlimLine Tubing promises to be a favorite
among CPAP users. In addition to this, ResMed introduces a smart-fit
cuff design that makes it easier to attach and remove the tube from your
mask and machine.
By enhancing the Easy-Breath motor with axial air-flow, foam, and noise
isolating materials, ResMed has created an ultra quite CPAP machine.
Measured at 24dBA (that’s no louder than normal breathing!), you or your
bed partner will never be awoken by your noisy CPAP machine.
Both the S9 AutoSet & the S9 Elite have CSA and OSA detection. The
enhanced Easy-Breathe motor features small diameter lightweight
impellers that provide lower inertia. This enables the motor to track
your normal breathing waveform and produce the small oscillations in
pressure required to detect CSAs. It uses the forced oscillation
technique (FOT) to determine the state of the airway during an apnea.
When an apnea is detected, small oscillations are added to the pressure
to measure airway patency. The CSA algorithm uses the resulting flow and
pressure to measure airway patency and differentiate central and
obstructive events. Your S9 AutoSet has the ability to compensate for
these events with its enhanced AutoSet algorithm.
All the S9 series machines come with onboard and removable data storage.
With a touch of the info button you will see a snapshot of your
therapy. Data is stored on board for up to 365 days and includes average
usage, used hours, days used, run hours, pressures, leak and AHI
information. The removable SD card provides detailed graphical data and
high resolution flow data that your physician can read.
By reducing pressure during exhalation, the patented EPR Easy-Breathe
technology makes the adjustment to CPAP therapy easier and more natural
for the user.
Do you ever have trouble knowing if your mask has a sufficient seal?
With the Mask Fit option, your machine will run a quick diagnostic to
let you know if your seal is sufficient. Simply select what type of mask
you are using (Full Face, Nasal, or Nasal Pillows) put your mask on,
from the Home screen push and hold the dial for three seconds. Your
machine will perform a short 3 minute diagnostic and you will see on the
screen display, an Adjust or Good indicator, letting you know if you have a
good fit.
